Tektronix LumaColor II J18, Instruction Manual

Page: 22 / 114

Power Options
1–4 J18 Photometer Instruction Manual
Battery Installation
CAUTION.
Follow the manufacturers’ guidelines for the handling and
disposal of batteries.
To replace the alkaline battery (refer to Figure 1–2):
1. Turn off the J18.
2. Open the battery compartment located on the back cover of
the J18.
3. Remove the old battery, and replace it with a new one. Arrange
the wires so that they will not interfere with the battery cover.
4. Close the battery compartment.
5. Turn on the J18 and make sure that the low-battery warning is
not flashing.
Figure 1–2: Replacing the Battery
Power Options
1–4 J18 Photometer Instruction Manual
Battery Installation
CAUTION.
Follow the manufacturers’ guidelines for the handling and
disposal of batteries.
To replace the alkaline battery (refer to Figure 1–2):
1. Turn off the J18.
2. Open the battery compartment located on the back cover of
the J18.
3. Remove the old battery, and replace it with a new one. Arrange
the wires so that they will not interfere with the battery cover.
4. Close the battery compartment.
5. Turn on the J18 and make sure that the low-battery warning is
not flashing.
Figure 1–2: Replacing the Battery