Tektronix LumaColor II J18, Instruction Manual

Page: 20 / 114

Product Description
1–2 J18 Photometer Instruction Manual
Unpacking the J18 LumaColor

II Photometer
This section describes the accessories that are shipped with the J18.
If the contents of the shipping container are incomplete or damaged,
contact your Tektronix representative.
The J18 LumaColor

II Photometer is shipped with the following
equipment:
H
J18 LumaColor

II Photometer
H
Instruction Manual (this manual)
H
Alkaline battery (Installed)
IEC type 6LR61, NEDA type 1604
Repackaging for Shipment
If you must ship the J18 or one of the J1800 series sensor heads,
package it as follows:
1. Use the original carton, or an equivalent carton with dimensions
at least three inches greater than the instrument to allow for
proper cushioning.
2. Cover the instrument with a polyethylene bag to protect its finish.
3. Cushion the instrument on all sides with packing material. Seal
the carton with shipping tape or with an industrial stapler.
4. If you are shipping the product to a Tektronix Service Center, be
sure to label the carton with the name of your company, a person
to contact at your company, and a description of the problem.
Product Description
1–2 J18 Photometer Instruction Manual
Unpacking the J18 LumaColor

II Photometer
This section describes the accessories that are shipped with the J18.
If the contents of the shipping container are incomplete or damaged,
contact your Tektronix representative.
The J18 LumaColor

II Photometer is shipped with the following
equipment:
H
J18 LumaColor

II Photometer
H
Instruction Manual (this manual)
H
Alkaline battery (Installed)
IEC type 6LR61, NEDA type 1604
Repackaging for Shipment
If you must ship the J18 or one of the J1800 series sensor heads,
package it as follows:
1. Use the original carton, or an equivalent carton with dimensions
at least three inches greater than the instrument to allow for
proper cushioning.
2. Cover the instrument with a polyethylene bag to protect its finish.
3. Cushion the instrument on all sides with packing material. Seal
the carton with shipping tape or with an industrial stapler.
4. If you are shipping the product to a Tektronix Service Center, be
sure to label the carton with the name of your company, a person
to contact at your company, and a description of the problem.