Tektronix KEITHLEY 707B, Reference Manual, Page: 125 / 534

Section 3: Functions and features Models 707B and 708B Switching Matrix Reference Manual
3-8 707B-901-01 Rev. B / January 2015
Remote interface scanning
Scan and trigger commands
The following list contains commands associated with triggers and bus operation scanning:
•
trigger.blender[N].clear() (on page 7-201)
•
trigger.blender[N].orenable (on page 7-202)
•
trigger.blender[N].overrun (on page 7-203)
•
digio.trigger[N].clear() (on page 7-54)
•
digio.trigger[N].pulsewidth (on page 7-57)
•
digio.trigger[N].stimulus (on page 7-59)
•
digio.trigger[N].wait() (on page 7-61)
•
lan.trigger[N].assert() (on page 7-108)
•
lan.trigger[N].clear() (on page 7-108)
•
lan.trigger[N].overrun (on page 7-113)
•
lan.trigger[N].stimulus (on page 7-115)
•
lan.trigger[N].wait() (on page 7-117)
•
scan.add() (on page 7-136)
•
scan.background() (on page 7-139)
•
scan.bypass (on page 7-140)
•
scan.create() (on page 7-141)
•
scan.execute() (on page 7-142)
•
scan.list() (on page 7-143)
•
scan.mode (on page 7-145)
•
scan.reset() (on page 7-146)
•
scan.scancount (on page 7-147)
•
scan.state() (on page 7-148)
•
scan.stepcount (on page 7-149)
•
scan.trigger.arm.clear() (on page 7-149)
•
scan.trigger.arm.set() (on page 7-150)
•
scan.trigger.arm.stimulus (on page 7-150)
•
scan.trigger.channel.clear() (on page 7-152)
•
scan.trigger.channel.set() (on page 7-152)
•
scan.trigger.channel.stimulus (on page 7-153)
•
scan.trigger.clear() (on page 7-155)