manualshive.com logo in svg

Tektronix Keithley 2231A-30-3, Performance Verification Manual, Page: 21 / 46

Share
Download
Tektronix Keithley 2231A-30-3 Performance Verification Manual Download Page 21

Section 3: Performance Verification 

Model 2231A-30-3 Triple-Channel DC Power Supply Performance Verification     

3-6 

077102700/ July 2014 

 

 

Instrument test 

current        Test voltage     DUT current        Min          Measured current         Max    

 

Channel 2 

 
0%                              15V                     0.0000A                       0.000000A              ------------                          0.01000A 
 
25%                            15V                        0.7500A                      0.73850A                  ------------                          0.76150A 
 
50%                            15V                        1.5000A                      1.48700A                  ------------                          1.51300A   
 
75%                            15V                        2.2500A                      2.2355A                    ------------                          2.2645A 
 
100%                          15V                        3.0000A                      2.9840A                    ------------                          3.0160A 
 

 
 

Instrument test 

current        Test voltage     DUT current        Min           Measured current       Max    

 

Channel 3 

 
0%                                3V                          0.00000A                  0.000000A                  -----------                        0.01000A 
 
25%                              3V                          0.7500A                    0.73850A                    -----------                        0.76150A 
 
50%                              3V                          1.5000A                    1.48700A                    -----------                        1.51300A 
 
75%                              3V                          2.2500A                    2.2355A                      -----------                          2.2645A 
 
100%                            3V                          3.0000A                    2.9840A                      -----------                          3.0160A 
 
 

Table 15: DC current readback accuracy 

 

Instrument test                      Measured                          Absolute        Maximum 

voltage          Test current        current       Current readout         difference       difference 

 

Channel 1 

 
0%                                0A                                  ------------                ------------                          ------------                0.0100A 
 
25%                              0.75A                            ------------                ------------                          ------------                0.0115A 
 
50%                              1.5A                              ------------                ------------                          ------------                0.013A 
 

Summary of Contents for Keithley 2231A-30-3















































Reviews:

No comments