Pollution degree rating
Pollution degree 2 (as defined in IEC 61010-1). Rated for indoor, dry location use only.
IP rating
IP20 (as defined in IEC 60529).
Measurement and overvoltage category descriptions
Measurement terminals on this product may be rated for measuring mains voltages from one or more of the following
categories (see specific ratings marked on the product and in the manual).
•
Category I. Circuits not directly connected to a mains supply.
•
Category II. Circuits directly connected to the building wiring at utilization points (socket outlets and similar points).
•
Category III. In the building wiring and distribution system.
•
Category IV. At the source of the electrical supply to the building.
Note: Only measurement circuits have a measurement category rating. Other circuits within the product do not
have either rating.
Environmental considerations
This section provides information about the environmental impact of the product.
Product end-of-life handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling. Production of this equipment required the extraction and use of natural resources. The equipment
may contain substances that could be harmful to the environment or human health if improperly handled at the product’s
end of life. To avoid release of such substances into the environment and to reduce the use of natural resources, we
encourage you to recycle this product in an appropriate system that will ensure that most of the materials are reused or
recycled appropriately.
This symbol indicates that this product complies with the applicable European Union requirements according to
Directives 2012/19/EU and 2006/66/EC on waste electrical and electronic equipment (WEEE) and batteries.
For information about recycling options, check the Tektronix Web site (
).
Compliance information
TIVP Series IsoVuTM Measurement System User Manual
xix
