Operating Basics
2–6
DS1000 Series User Manual
the dashes are replaced by blocks ‘
J
’ from the left, until all
dashes have been replaced (RF amplitude > 1 mV).
2. Audio Output Status.
The audio output display shows the current status of the audio
signals on the XLR connectors located on the rear panel.
3. Program Set-up.
The program set-up display allows you to view the configuration
of the current program (preset). The top line shows the active
program number and the bottom lines shows the program items.
Use the up and down buttons (
↑
and
↓
) to view the entire
configuration by scrolling through the various program items.
Refer to page 3–3 for a description of each item in the Program set
up.
To change a Program, select the Program number here, then press
the CONFIG button. Refer to Program Configuration on page 3–3
for further instructions.
4. NICAM Error Count (PAL systems only).
Summary of Contents for DS1001
