Tektronix DS1001, User Manual

Page: 40 / 130

Reference
3–2
DS1000 Series User Manual
Table 3–1: Configure menu hierarchy (cont.)
Range Selections
Configure
menu
Audio Preference NTSC: BTSC
PAL: NICAM, FM
Audio Input Select NTSC: Mono, Mono-SAP, Stereo, SAP
PAL: Mono1, Mono2, Mono1-Mono2, Stereo
AFC Status On, Off
Sound Trap On, Off
Stereo Noise NTSC: 1–16
SAP Noise NTSC: 1–16
2 Frequency
Response Manual Frequency
Response Adjust –10 to +10
3 Contrast
Adjust Display Contrast
Adjust Dark to Max brightness
4 User Channel
Table Channel (1–50) NTSC: 55.25 to 801.25 MHz
PAL: 45.25 to 860.25 MHz
5 Serial Set-up Serial Mode RS232, RS485
Unit Address 32 to 63
RTS/CTS Disabled, Enabled
RS485 Termination Unterminated, Terminated
Quick Guide
To configure the television demodulator, follow these procedures:
1. Press the front panel CONFIG button to access the Configuration
menu.
2. Use the up and down buttons (
↑
and
↓
) to select a configuration
mode.
3. Press the enter button (
↵
) to enter the selected configuration mode.