Product disassembly procedures
Follow the procedures in this section to disassemble the instrument to remove the hard disk drive and to access the
single-board computer.
You will need a screwdriver or screwdriver handle with the following tips: P1, P2, and T15 to disassemble and reassemble
the instrument.
WARNING.
To avoid electric shock, always power off the instrument and disconnect the power cord before cleaning or
servicing the instrument.
CAUTION.
Many components within the chassis are susceptible to static discharge damage. Service the chassis only in
a static-free environment.
Observe standard handling precautions for static-sensitive devices while servicing the chassis.
Always wear a grounded wrist strap, or equivalent, while servicing the chassis.
Tektronix BERTScope BSA Series Declassi
fi
cation and Security Instructions
13
