Tektronix AWVG1, User Manual

Page: 50 / 116

Functional Command Groups
3- 6
AWVG1 Wideband Video Generator User Manual
Sense
Use these commands to adjust the module timing.
Table 3- 3: :SENSe commands
Command Description
:SENSe:CORRection:MDELay:HORizontal(?) Set or query horizontal time delay of the module with respect to
the rest of the instrument
:SENSe:CORRection:MDELay:VERTical(?) Set or query vertical time delay of the module with respect to the
rest of the instrument
Source
Use these commands to define the signal parameters for the module.
Table 3- 4: :SOURce commands
Command Description
:SOURce:MVIDeo:SYNC(?) Set or query the amplitude of the sync pulse
:SOURce:MVIDeo:BURST(?) Set or query the color burst amplitude
:SOURce:SWEep:AMPLitude(?) Set or query the sweep signal amplitude
:SOURce:SWEep:FREQuency:STARt(?) Set or query the frequency of the sweep start
:SOURce:SWEep:Frequency:STOP(?) Set or query the frequency of the sweep end point
:SOURce:SWEep:MARKer5:FREQuency(?) Set or query the frequency of frequency markers 1 through 5
:SOURce:SWEep:MARKer5:STATe(?) Set or query the state of frequency markers 1 through 5
:SOURce:ZONE:FREQuency(?) Set or query the value of the zone plate frequency
:SOURce:ZONE:AMPLitude(?) Set or query the value of the zone plate amplitude
:SOURce:ZONE:K(?) Set or query the value of the K parameter
:SOURce:ZONE:KX(?) Set or query the value of the KX parameter
:SOURce:ZONE:KX2(?) Set or query the value of the KX2 parameter
:SOURce:ZONE:KXT(?) Set or query the value of the KXT parameter
:SOURce:ZONE:KXY(?) Set or query the value of the KXY parameter
:SOURce:ZONE:KY(?) Set or query the value of the KY parameter
:SOURce:ZONE:KY2(?) Set or query the value of the KY2 parameter
:SOURce:ZONE:KYT(?) Set or query the value of the KYT parameter
:SOURce:ZONE:KT(?) Set or query the value of the KT parameter
:SOURce:ZONE:KT2(?) Set or query the value of the KT2 parameter
:SOURce:ZONE:TRESet:STATe(?) Set or query the state of the T parameter