Tektronix AWVG1, User Manual

Page: 37 / 116

Operating Procedures
AWVG1 Wideband Video Generator User Manual
2- 13
By making and saving changes to the zone plate parameters, you can create a
new signal that is based on the selected signal. Changes you make affect only the
new signal. For more information on Zone Plate Signals, refer to
Appendix C
.
NOTE .
You can also define zone plate signals using the SDP2000 Signal
Development Program (Version 2.0 and up). Refer to the SDP2000 online help.
To change the zone plate coefficients, perform the following steps:
1.
Push the
Test Signals
button. In the Test Signals window, touch the Zone
Plate icon to select the zone plate signal you want to modify. (This procedure
uses the 625 Bullseye signal.)
2.
Touch the Active Signal Parameters icon at the bottom of the window. The
Active Signal Parameters window appears, as shown on page 2--8.
Zone Plate Test Signal