Tektronix AWVG1, User Manual

Page: 34 / 116

Operating Procedures
2- 10
AWVG1 Wideband Video Generator User Manual
By making and saving changes to the video parameters, you can create a new
signal that is based on the selected signal. Changes you make affect only the new
signal. To change the video parameters settings, perform the following steps:
1.
Push the
Test Signals
button. In the Test Signals window, select the
1 -- 30 MHz Adjustable Line Sweep signal. This signal has five frequency
markers that you can adjust.
2. Touch Active Signal Parameters at the bottom of the window. The Active
Signal Parameters window appears, as shown on page 2--8. Touch the
Video icon.
3. The Video Parameters window appears. Select the parameter you want to
change using the Navigation cursor keys. The example below shows
Marker 3 selected.
Video Parameters