Tektronix AWG7000 Series, Service Manual

Page: 91 / 140

AWG7000 Series Service Manual
4-39
Troubleshooting
This section contains information and procedures designed to help you isolate
faults to a module.
This section requires that service personnel have the appropriate skills to work on
this instrument, including PC troubleshooting and Microsoft Windows operating
system skills. Details of PC and Windows operation and service are not in this
manual.
For assistance, contact your local Tektronix Service Center.
Equipment Required
You will need a digital multi-meter to check power supply voltages, as described
on page 4-42.
Fault Isolation Procedure
Follow the primary troubleshooting tree in Figure 4-18 and Figure 4-19 for fault
isolation.
WARNING.
Before performing this or any other procedure in this manual, read the
General Safety Summary and Service Safety Summary found at the beginning of
this manual.
To prevent possible injury to service personnel or damage to electrical
components, please read
Preventing ESD on page 4-1.