Tektronix 2335, Instruction Manual, Page: 21 / 104

(TjT)
BW L IM IT Switch—Lim its the bandwidth o f the
vertical amplifier to approximately 20 MHz when
pressed in. Push button must be pressed a second
time to release it and regain full 100-MHz bandwidth
operation. Provides a method fo r reducing inter­
ference from unwanted high-frequency signals when
viewing low-frequency signals.
(|? )T R fG VIEW Switch-Press in and hold this push
button to display a sample o f the signal present in
the A Trigger am plifier (for all A TRIGGER
SOURCE switch settings except VERT MODE).
A ll other signal displays are removed while the
TRIG VIEW push button is held in.
HORIZONTAL
Refer to Figure 5 for location o f items 20 through 26.
(
55
)
B D ELAY TIME POSITION Control-Selects the
amount o f delay time between the start o f the A
Sweep and the start o f the B Sweep. Delay time is
variable from 0.05 times to 10.0 times the A SEC/
DIV switch setting.
10
2335 Operators