Clear and Sanitize Procedures
Clear Diagnostic Log
Procedure
1.
Press the
CONFIG
button. Then press
Utilities
>
View Diagnostic Log
.
Press
SEL
to display the log.
2.
Press
>
until the box by “Erase Log” is highlighted. Then press
SEL
to
remove all entries in the diagnostic log.
3.
Press
>
until the box by “Exit” is highlighted. Then press
SEL
to exit the
log display.
4.
Press the
CONFIG
button to exit the con
fi
guration menu.
Clear IP Address Fields
Procedure
1.
Press the
CONFIG
button. Then select
Network Settings
.
2.
Set
IP Con
fi
g Mode
to
Manual
to display the IP address.
3.
Navigate to
IP Address
. Then press
>
to enter the edit mode. Enter
“000.000.000.000” for the IP address.
4.
Repeat Step 3 for the Subnet Mask and Gateway Address.
5.
Press the
CONFIG
button to exit the con
fi
guration menu.
1741C Declassi
fi
cation and Security
5