Tektronix 071-0833-02, Instructions Manual

Page: 34 / 69

26
K4000 Transport Cart Instructions
Customization
You can customize your cart in several ways:
H
You can adjust the heights of any of the shelves. First remove all equipment
from the cart. Loosen the four screws associated with the shelf (or for tilting
shelves, the shoulder bolts, oval knobs, and set screws), adjust the height,
level, and retighten.
H
You can move the Nylon straps to any shelf where they are needed.
H
You can apply the press-on probe holder anywhere on the cart that is
convenient. Once applied, it cannot be moved. Make sure the place you are
applying it is clean and dry. Peel the backing from the sticky tape and press
holder into place.
H
You can rearrange the configuration of the shelves by disassembling the cart
and reassembling it in a different order. Remember to build the cart from the
bottom, shelf by shelf.
WARNING.
Changes in shelf location and loading can affect the balance of the
cart. If you arrange the shelves differently from the configuration described in
this manual, test the cart carefully for stability before using it.