Tektronix 071-0833-02, Instructions Manual

Page: 18 / 69

Bottom Shelf
10
K4000 Transport Cart Instructions
Figure 7: Aligning the bottom shelf
3. Slide the bottom shelf down to into position. A light pencil line has been
marked on the insides of the leg assemblies at this position. Slide the bottom
shelf slowly between the leg assemblies to avoid scratching the paint. Use
the circular bubble level to make sure the shelf is level.
If you have another person helping you, that person can hold the shelf at the
proper height as you tighten the screws. If you are assembling the cart by
yourself, tighten each screw in turn just enough to hold, and then adjust the
heights one by one until the shelf is positioned properly.
4. Use the 3/16 inch Allen wrench to tighten the cap head screws. Tighten them
first snugly, then go back and tighten them firmly.