Tektronix 071-0833-02, Instructions Manual

Page: 20 / 69

Keyboard Shelf
12
K4000 Transport Cart Instructions
2. Position the keyboard shelf horizontally between the leg assemblies, as
shown in Figure 9. Position the shelf so that the long end of the shelf is
positioned to the front of the cart.
3. Slide the keyboard shelf down to into position. (A light pencil line has been
marked on the insides of the leg assemblies at the keyboard shelf position.)
Slide the keyboard shelf slowly between the leg assemblies to avoid
scratching the paint. Use the circular bubble level to make sure the shelf is
level.
If you have another person helping you, that person can hold the shelf at the
proper height as you tighten the screws. If you are assembling the cart by
yourself, tighten each screw in turn just enough to hold, and then adjust the
heights one by one until the shelf is positioned properly.
4. Use the 3/16 inch Allen wrench to tighten the cap head screws. Tighten them
first snugly, then go back and tighten them firmly.