Technology Solutions
Instruction Manual
Tek-Wave 4300C
www.tek-trol.com
24
•
Press again to mark zoom end position.
•
Press to confirm.
•
Press to exit.
5.3.3.3.4
Simulation
•
Simulation is used to simulate the 4 to 20mA output current.
•
The accuracy and linearity of the output current can be checked by simulation.
•
Press to enter simulation mode.
•
Press to select simulation mode.
•
Press to confirm.
•
Three types of simulation as follows:
o
Percent: The output current is decided by a percent value:100% is relative to 20mA,0%
is relative to 4mA.
o
Current: the output current is regulated by a current value.
o
Distance: the output current is decided by a distance value.
o
The output current depends on minimum, maximum adjustments and mapping.
5.3.3.4
Service
•
Trained technicians can only use this menu with professional functions.
•
They are False echo storage, reset, sensor settings back up Password setting.
OK
BK
OK
