Technology Solutions
Instruction Manual
Tek-Wave 4300C
www.tek-trol.com
20
5.3.3.1.4
Damping
•
Press to enter edit menu.
•
Press to confirm the modification.
•
Press to exit.
5.3.3.1.5
Mapping Curve
•
This menu defines the correlation between the measured value and the output current.
•
Linear or non-linear mapping can be selected in this menu.
•
For the non-linear correlations, parameters setting must be done by a computer previously.
•
Press to move the arrow, select linear or non-linear.
•
Press to confirm the modification.
5.3.3.1.6
Scaled Units
•
The unit of the scaled output value can be set in this menu.
5.3.3.1.7
Scaling
•
Edit parameter value.
•
Press to confirm the modification.
OK
OK
BK
OK
OK
