7
Monitor by dialing
voice call
√
√
Dial the
phone
number
Monitor by dialing
video call
√
√
Set sending SMS command
√
√
Add
、
modify
、
delete sensor
√
√
Bind wireless remote handle
√
√
Change password
√
×
System Recovery
√
×
2.Arming/ Automatic alarm
Arming is to make the remote camera in working status. In this status, all
connected wireless sensor are in working.
Under the arming, if any wireless sensor is activated, camera will send SMS or
Video call or voice call to master to inform alarm immediately. If the master
doesn
’
t answer the call, it will dial the next preset numbers until answered. This
process will repeat three times, then exit dialing mode automatically if none of
the preset numbers answered.
3.Disarming
Disarming is to deactivate the remote camera. All connected wireless sensors are
in non-working status,the camera will not alarm automatically unless pressing
the emergency key.
4.Incoming video call
and Talkback
Real-time video can be turned on when master or normal users call the camera
,at
this time,press
”
3
”
key of phone button, turn on the Live voice amplifier,can
shout on site.turn off the amplifier,please press
“
4
”
key of phone button.
5.Setting
All the set to this product can be completed by sending SMS command.
6.Reset
Press and hold the SET key,and push the ON/OFF key to ON position, 5 seconds
later , the camera will automatic reset after you heard two
“
tick..
”
sound from the
