17
the camera will enter into the state to add new wireless sensors:
status:
#add sensor#sensor name#
The sensor name should be English or Arabic number, Max 50 letters. It is
named by Master to identify different alarm in the future.
For example
：
#addsensor#door#
If the SMS doesn
’
t contain the name of sensor
，
you can send #addsensor# to
the camera.
After receiving the SMS command, the camera will sound
“
tick
…”
sound and
the indicator light will flash with red and green alternately. Then send SMS
“
Waiting to add/learn sensors. Trigger the sensor to send signal immediately
”
How to trigger sensor to send signal? For example, for wireless door magnet,
make it open and close once to send the signal to the camera. If the sensor added
successfully, the camera will sound
“
tick
…”
sound, then exit the learning status,
and reply
“
Adding sensor successfully
”
.
If the camera fails to load the sensor or no sensor exists, the indicator light of the
camera will flash with red and green alternately for about one minute, then the
camera will exit the loading status automatically and back to the previous
arming or disarming status.
Max 15pcs wireless sensors can be added to the remote camera. If reaching its
max number, the camera will send SMS:
“
The sensors are full. Please delete old
sensors before add new ones.
”
If the sensor description invalid, the camera will reply
“
Sensor name invalid,
please rename the sensor
”
.
Delete all wireless sensors:
Master or users send following SMS to camera:
#delsensor#
