16
In disarming status, camera will not alarm (Unless press the emergency key on
the remote control).
All connected wireless sensors do not work.
Method 1: send following SMS command to camera:
Master and normal users
：
#disarm#
Method 2: press the key of
“
Disarming
”
on the remote control. You can hear
“
tick
…”
sound if operation successful. And receive
“
Disarming successfully
”
SMS. Then the indicator light turns green and flashes.
6. Built-In PIR Sensor ON/ Off (Default: OFF)
(Authority: Master, Normal Users)
Only built-in PIR sensor to open and the camera on the Arming status, all the
moving objects in the detected distance of the PIR sensor will trigger the camera
alarm.PIR alarm SMS:
“
Inside PIR Alarm!!!
”
PIR Sensor ON:
Master or Normal User send following SMS to the camera:
#pir#1#
After set successfully,the camera will reply SMS
“
Inside PIR open
”
;
PIR Sensor Off (Default
“
Off
”
)
Master or Normal User send following SMS to the camera:
#pir#0#
After set successfully, the camera will reply SMS
“
Inside PIR close
”
.
7. Wireless sensor
(Authority: Master, normal Users)
Any 315MHz (or 433MHz) wireless sensor, such as infrared motion detector
wireless door magnet, wireless smoke sensor etc, can be set as alarm sensor of
the camera.
Add wireless sensor:
1
）
Power on the wireless sensor.
2
）
Master or normal users send following SMS command to camera and
