TEKSAN DIESEL GENERATOR SETS, Operation And Maintenance Manual

Page: 53 / 60

53
BBK-V.122018_ENG People First...
EVERLASTING COMPANY
EVERLASTING
WE
COMPANY
ARE YOUR
EVERLASTING
WE
COMPANY
ARE YOUR
• After Teksan’s transportation responsibility (as stated in contract) is finished, transportation, loading and
unloading is under Buyer/Owner’s responsibility. The possible damages during these processes are not under
the warranty coverage.
• The storage of the generator set during the time between the delivery or commissioning date and the first
start-up date of the generator set. If this duration is longer than 3 months, then storage must be done with
respect to storage principals as indicated in the Maintenance and Operation Handbook.
• Generator set control unit should be programmed, set or changed under Teksan approval.
• Run and stop the generator set stated as in the maintenance and operation handbook. Do not run or stop the
generator set under load. This may damage engine valves and its components, alternator exciter windings,
rotating diodes, suppressor and voltage regulator card.
• Commissioning approval is only valid for installation location. If the position of the generator set is desired to
be changed, Teksan dealer or authorized representatives should be informed.
• Original spare parts and consumable items (oil, fuel, filter, belt etc.) approved by Teksan should be used.
• Completing any outstanding payments for the purchase of equipment, parts or services relating to the
equipment under warranty.
Limitations
The warranty does not cover;
• Periodical maintenance, controls and settings should be made strictly according to maintenance and operation
handbooks.
• Any interference to generator set by people not confirmed by Teksan.
• Any failures resulting from abuse, neglect and/or improper repair.
• Any failures resulting from Buyer/Owner’s delay making the product available after being notified of a potential
product problem.
• Normal wear, the spare parts that should be changed and consumable items such as lubricating oil, filters,
coolant, V-belt, injector nozzles etc.
• Any failures in batteries or failures resulted from batteries.
• Any failures resulted from using biodiesel, jet fuels (JP), sub-kerosene fuel, fuel-oil, benzene, etc. and
additionally dirty, water mixed, with chemical additives. Diesel fuel, specified in the handbooks should be used
for the diesel generator sets.
• Any failures resulted from modifications and additions on Control panel systems – manual, automatic,
synchronization panels, transfer panels, equipments, etc. – These are should be made by Teksan or authorized
representatives.
• Any failures of switching devices resulted from high current, low or high voltage due to the fact that generator
transfer panel is made suitable to generator output rating – contactor, motor circuit breaker - etc.
• Any failures resulted from erasing, removing or changing of the labels belonging to Generator Set.
• Any failures resulted from under no-load or low load as indicated in Maintenance and Operation handbook.
• Any failures resulted from operating the generator set in different operation mode, loads greater than rated
power as stated on its label (Standby) and unbalanced load.
• Any failures emerged after warranty period expiration date will not be considered under warranty coverage.
• Any failures resulted from act of god, earthquake, snowstorm, avalanche, fire, flood or mains electricity are not
under warranty coverage.
• In no event will Teksan be liable for loss of use, loss of profits, loss of or damage to other property,
inconvenience, commercial loss or other special, incidental or consequential damages whatsoever.
• Any warranty of fitness for purpose shall not be effective unless explicitly confirmed by Teks an in writing. In
case of an express confirmation of fitness for purpose, the provisions above shall apply accordingly.