TEKSAN DIESEL GENERATOR SETS Operation And Maintenance Manual Download | Manualshive

Page: 9 / 60

background image

9

BBK-V.122018_ENG

People First...

EVERLASTING COMPANY

EVERLASTING

WE

COMPANY

ARE

YOUR

EVERLASTING

WE

COMPANY

ARE

YOUR

1.2.3.Towing Trailer Mounted Generator Sets

Be sure that there is nothing wrong about the towing system including the towing bar, connection points, hooks,
pins, etc... Check the chain, brake or electrical interconnections if there is available. Also check the moving parts,
connection or interlock points of the generator set. Be sure that they will not cause any problem during this
transportation process.

Make sure that all tires on the trailer are in conformity with norms and standards and in good condition. Also be
sure that the air pressure inside these tires, is at a specified level depending on the gross weight of the trailer and
generator set. Do not change the size or type of tire without the confirmation of manufacturer. Furthermore, make
sure that all the bolts, nuts and parts are tightened with an appropriate torque.

If there are any available, make sure that all the headlights, signal lights, brake lights or the fog lights are running
properly and their covering lenses or glasses are clean and in good condition.

Do not let people to stand on the towing bar or travel on the generator set. Keep your hands and fingers away from
the tightening points. Do not attempt to pull the trailer by manpower.

If possible, choose a dry place for parking or placing the trailer. Also it is important to use wheel chocks for fixing
all the wheels.

Act in accordance with all laws and regulations that define the traffic rules. Especially be sure not to not exceed
the allowed speed limit while travelling with the trailer.

Do not drive in traffic with uncertified trailer.

** Trailer is not a standard product but a sales option.

«
...
7
8
9
10
11
...
»

Summary of Contents for DIESEL GENERATOR SETS





























































Reviews:

No comments

Related manuals for DIESEL GENERATOR SETS

Brand: Vante Pages: 33

Brand: Accton Technology Pages: 2

Brand: Sangean Pages: 1

Brand: Arwin Pages: 32

Onan GenSet 3.ORDJA

Brand: McGraw-Edison Pages: 159

POF GB/UAE 1xPPR

Brand: Datalight Pages: 2

Brand: FNX Solar Pages: 32

Brand: Feider Machines Pages: 35

Power Pod Elite

Brand: Nature's Generator Pages: 20

Brand: Wacker Neuson Pages: 214

Brand: Billow Technology Pages: 90

Brand: Panasonic Pages: 22

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 4

Brand: Philips Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands