10. SCO UNIX DRIVERS
DC-390 Series User’s Manual
62
62
The SCO Unix/OpenServer driver diskette is now made. Proceed to the following instruction
for installation procedures.
10.2 New SCO UNIX Installation
with DC-390 as the primary SCSI adapter
1.
Insert the system diskette N1 and boot up.
2.
When the boot prompt is shown:
Boot
:
Type the following command to proceed:
link
3.
When you are prompted “What package do you need linked in the system, or a to quit?”
Type the following package name to proceed:
ams
If you install DC-390/U/F/U2B/U2W with Openserver 5.0, skip step 4.
4.
When you are prompted “Table "io_init" contains(at27) another routine named
"amsinit”, please enter which routine (0-40) to replace (? To list),
a' to add "amsinit" at the end [default],
'n' to do nothing.
Or q to quit:”
Type the following option to proceed:
27
("io_init value")
5.
The system will keep booting from floppy N1, then request to have the driver diskette
inserted. Insert the SCO driver diskette created in 10.1. After the driver is successfully
loaded, follow the normal procedures to install SCO UNIX. During the installation
process, the driver diskette may need to be inserted again as instructed.
Once the system reboots with the driver successfully installed, messages similar to the
following will be displayed: