Tekram Technology DC-390 Series, User Manual, Page: 19 / 71

3. CONFIGURING YOUR SCSI CARD
DC-390 Series User’s Manual
19 19
3.2.1
Show Adapter Information
This screen displays detailed information about the SCSI chip, ROM BIOS address, I/O port
address, IRQ, PCI interrupt line, etc. The information about the SCSI Chip, IRQ Trigger
Type and Data Xfer Type is provided by the DC-390 series adapter itself. The rest of the
information in this table is provided by the mainboard's BIOS, which should support the PCI
PnP specification. This information cannot be modified.
Adapter Information
SCSI Chip …………………... AM53C974A
Bus Type ……………………. PCI Bus
Bus# ………………………… 00h
Device# ……………………... 0Ch
Function# ……………………. 00h
BIOS ROM mapped at ……... CC00h
IO Address ………………….. 96000h
PCI Interrupt Line ………….. INTA#
IRQ# ………………………... 11
IRQ Trigger Type …………... Level triggered
Data Xfer Type ……………... PCI Bus Master
3.2.2
Set Adapter Options
Set Adapter Options
Adapter SCSI ID ………………………. SCSI ID 7 -- Default
Boot Device ID ………………………… SCSI ID 0 -- Default
Boot Device LUN ……………………... LUN 0 -- Default
Boot From CD-ROM ………………….. Disabled -- Default
INT13 Extension ……………………… Enabled -- Default
Greater Than 1G Support ……………... Enabled -- Default
More Than 2 Drives Support ………… Enabled -- Default
Removable Media as BIOS Device …. Boot only -- Default
Immediate Return on SEEK Command… Disabled -- Default
Scan All LUN For Devices…………… Disabled -- Default
Active Negation ……………………….. Enabled -- Default
Power on RESET SCSI Bus ………….. Enabled -- Default
Delay Before BIOS scans device ……… 3 sec -- Default
Max Number of Tagged Commands … 32 -- Default
SCAM Support ….…………………….. Enabled -- Default
F2 or F6 Function During Bootup ……. Enabled -- Default
Pressing <F8> will reset all the settings to their default values.