4. DOS ASPI DRIVERS & UTILITIES
30
30
Easy DOS Driver Installation Software (INSTALL.EXE)
easy driver installation for your SCSI devices. Under DOS, the driver installation will be
necessary if either:
More than two Hard Drives are installed and "
" is
disabled (sec.
), or
b) A SCSI device other than a Hard Drive is installed (CD-ROM, etc.)
This software program provides you with information about the adapter and your SCSI
the CONFIG.SYS and AUTOEXEC. BAT files automatically. Further information about
drivers and step-by-step installation procedures can be found in Chapter 3: DOS ASPI
The following screens illustrate the DOS driver install procedure:
1.
To begin, this screen displays information about the adapter number (HA#0), I/O port
address (Base E400H), interrupt level (IRQ 11), and SCSI ID (ID 7). In this case, there
select which adapter you want to work with.
The system has the following Host Adapter(s)
DC-390 HA#0 Base E400H
IRQ 11 ID7
This screen provides information regarding the SCSI devices controlled by the chosen
The system has the following SCSI devices:
Dev#
SCSI ID#
Vendor ID
Revision Level
0
0
FUJITSU
0607
1
1
MAXTOR
2.11
2
3
NEC
1.0
3.
After selecting a device, more detailed information is displayed. For example, selecting
the Fujitsu drive brings up a window like so: