Teknion Leverage Installation Manuals Download Page 373

Page: 373 / 516

Section:
Description:

Page No:

Date:

SECURE OVERHEAD CABINET AND BRACKETS

May 2020

5 of 5

TLE_412

CENTERMOUNT STORAGE BRACKET INSTALLATION

MOUNTED STORAGE AND ACCESSORIES

leverage

Installation Guides

STEP 5: Place Overhead on top of the Panel. Align pilot holes with Bracket holes and fasten using Screws provided.

Center Mount Support Bracket Installation - Shallow Trough

Place Overhead on top of the
Panel aligning the pilot holes with
the Bracket holes and fasten with

screws provided.

Fasten brackets to the Panel trough.

When installing a Center Mount Support Bracket

on a shadow trough, Top Trim has to be installed.
Place a flat object on to of the Top Trim then

install the bracket as shown on previous page.

Summary of Contents for Leverage





































































































































































































































































































































































































































































































































Search results

Summary of Contents for Leverage

Reviews:

Teknion Leverage, Installation Manuals, Page: 373 / 516

Search results

Summary of Contents for Leverage

Reviews: