Section:
Description:
Page No:
Date:
TLE_366
0 of 3
May 2020
DUS TO LEVERAGE PARALLEL AND PERPENDICULAR INSTALLATION
WORKSURFACE SUPPORTS AND ACCESSORIES
STEP 1:
Screw Hex Bolt to Credenza (leave
1
2
" clearence). Insert Top and Bottom
Brackets into Panel Frame Slots. Align Credenza with Brackets and bring against
the Panel. Remove shelves if any, and then fasten Top Bracket with four wood
screws. Place the Anti-dislodgement plate under the bottom bracket and secure
with a Hex Bolt provided
STEP 1:
Screw Hex Bolt to Credenza (leave
1
2
" clearence) Insert Bottom Bracket
into Panel Frame Slots. Press and hold the Top Bracket against the top corner of
the Credenza. Place the Anti-dislodgement plate under the bottom bracket and
secure with a Hex Bolt provided. Fasten the top bracket with wooden Screws.
STEP 2:
Fasten the Top and Bottom brackets.
STEP 1:
Insert Top and Bottom Brackets into Panel Frame Slots.
Screw Hex Bolt to
Credenza (leave
1
2
" clearence). Place Credenza perpendicular to Panel. Push the Credenza so
that the Brackets are inserted into the top corner slot and the bottom leveler.