Section:
Description:
Page No:
Date:
TLE_366
0 of 3
May 2020
DUS TO LEVERAGE PARALLEL AND PERPENDICULAR INSTALLATION
WORKSURFACE SUPPORTS AND ACCESSORIES
STEP 1:
Insert Top and Bottom Brackets into Panel Frame Slots. Align Credenza
back slots with brackets.
Push Credenza against Panel.
STEP 2:
Fasten Top Bracket with four wood screws.
With an Allan Key, fasten the
Bottom Bracket with two Murakoshi screws provided.
STEP 1:
Insert Bottom Bracket into Panel Frame Slots. Insert Top Bracket into the
top slot at the back of the Credenza. Bring Credenza against the Panel inserting the
bottom bracket into the guide of the back leg. NOTE:Lift the Panel just a little in
order to engage the Top Bracket into the frame slots. Fasten the top an the bottom
brackets with the Screws Provided.
STEP 1:
Insert Bottom Bracket into Panel Frame Slot. Press and hold the Top
Bracket against the top corner of the Credenza.
Bring Credenza against the Panel.
Fasten the Top Bracket with four wood screws. With an Allan Key, fasten the
Bottom Bracket with two Murakoshi screws provided.