TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR
–
R01
TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR
–
R01
7
3.5
Module Interface
Figure 6
–
Module Card Detailed Interface
•
Network Connection: It is used for connection to analogue addressed panel network line.
•
Relay Connection: It is used for the output activation feature adjusted on the analogue
addressed panel.
•
Serial Port: It is used for software update.
•
USB: It is used for monitoring and analysis programs.
•
Tamper Button: It is used for detecting that the cover is opened. When the cover is opened,
this will be shown as a fault on the analogue addressed fire alarm panel.
•
OLED Screen: The screen will not work in quiescent state. It will be activated in case of any
alarm, fault state or when the cover is opened. Programming menu can be accessed on this
screen.
•
Alarm Led: It shows any alarm state on the wireless system.
•
Heart Led: It shows that the module is operating and the wireless network is set.
•
Fault Led: It shows any fault state on the system.
•
Low Battery Led: It lights when the battery of any wireless devices is low.
•
L1 Led: It lights when connection to wireless network is activated.
•
L2 Led: It lights when there is an ongoing process.
•
BACK Button: It is used for going back on the menu or for cancelling.
•
DOWN Button: It is used for proceeding on the menu or for decreasing a value on the menu.
•
UP Button: It is used for going back on the menu or for increasing a value on the menu.
•
FORWARD Button: It is used for going to a menu that is selected on the menu or for approval
purposes.
3.6
Programming Menu
Addressed Wireless Coordinator module menu will be explained under this topic.
BACK Button
DOWN Button
FORWARD Button
UP Button
OLED Screen
L5
–
Heart Led
L6
–
Low Battery Led
L1 Led
L2 Led
L4 - Heart Led
L3 - Alarm Led
Tamper Button
USB
Serial Port
Relay Connection
Network Connection
