TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR
–
R01
TWM-1885 ANALOGUE ADDRESSED WIRELESS COORDINATOR
–
R01
12
Functions
>1. Setup PAN
2. Delete PAN!!
3. Connection Permission
4. Reset PER
3.6.3.1
Setup PAN
Setting up a new wireless system can be made from this menu. PAN is an abbreviation used in the
network terminology and it stands for Personal Area Network.
A wireless system (PAN) is initially needed for the wireless devices to be connected to a network. If
there is a network set, the
“H
eart
Led”
blinks. If no network is set, the
“
Heart
Led”
is off. Thus, the
“
Heart Led
”
can be used as the indicator of a set network.
To enter the Setup PAN screen, navigate through the functions menu by using UP and DOWN buttons
and select
“
Setup
PAN”
menu.
To setup PAN
, select “Yes” or “No” by using
UP or DOWN buttons and press FORWARD button to
complete the operation.
This operation may take some time, therefore the warning “Waiting..” will be
shown on the screen. Once the PAN Setup operation is completed, the warning
“
Successful
”
will be
displayed on the screen and this warning will disappear after 2 seconds. The result of the PAN setup
operation can be verified by checking the
“
Heart
Led”.
The screenshots of this operation can be seen
below.
Setup PAN
Setup PAN Yes
Setup PAN
Setup PAN Yes
Setup PAN
Setup PAN Yes
Once the PAN setup operation is completed, the wireless devices can now be connected to the newly
established wireless network. The PAN connection permission must be activated for the devices to be
connected to the newly established PAN.
3.6.3.2
Delete PAN!!
A previously established PAN (Wireless Network) can be deleted from this menu. PAN deletion
operation does not affect other wireless networks, but only deletes the devices connected to it and
the settings and gets prepared for a new PAN to be set.
To enter the PAN deletion screen, navigate through the functions menu by using UP and DOWN
buttons and select
“
Delete
PAN!!”
menu.
To delete PAN, sel
ect “Yes” or “No” by using
UP or DOWN buttons and press FORWARD button to
complete the operation.
This operation may take some time, therefore the warning “Waiting..” will be
shown on the screen. Once the Delete PAN operation is completed, the
warning “Successful” will be
displayed on the screen and this warning will disappear after 2 seconds. The result of the Delete PAN
operation can be verified by checking the “Heart Led”. The screenshots of this operation can be seen
below.
Waiting..
Successful
