my
LOG
User Manual (1.1) Page: 16 / 24
SETTING CO LINE CALLING DIGIT
If
my
LOG
is connected to the extension line of a PBX, you need to write the code to be dialed
to make outside call to “CO Line Nr.” field (usually 9 or 0). So
my
LOG
will first dial this code to
get a free CO (central office) line, then requested phone number.
If you want
my
LOG
to wait between CO line request digit and phone number, add comma for
0.5 second pause. Up to 4 digits could be written into this field (including commas).
ENTERING DISCOUNT TRUNK CALL NUMBER
my
LOG
can dial discount call service providers’ code before dialing requested digits. Enter
service code into “Service Provider Nr.” field (with password digits if needed). You may add
commas as needed between digits to pause dialing. Up to 25 digits (including commas) can
be entered.
“Prefix” field will be opened when service code entered. Write necessary prefixes into this
field, to call over service provider. Multiple prefixes can be written by separating with commas.
By default “0” is written here, meaning all national and international calls are to be made over
service provider.
Some examples are shown in the below table about filling the prefix field;
00
International calls
00,05
International calls and numbers starting with 05
01,02,03,04,05,06,07,08,09 National calls
SHORTEST RECORDING
In this field, you may enter shortest record duration.
my
LOG
will save recordings to hard disk
only if longer than this duration.
LISTENING DIALER
If “Listen Dialer” box is checked
my
LOG
gives telephone line voices to the loudspeaker during
auto dialing. This feature is useful when activating auto dialing feature while telephone is
closed. You may pick the handset up at the moment, called party answers.
ALLOWING NETWORK SUPPORT
If you are using .NET version of
my
LOG
, you may enable/disable remote access to current
my
LOG
via local network or internet by checkin/unchecking “Allow Network Support” box.
This box is not active in standart version.
AUTOMATIC DELETION OF RECORDINGS
my
LOG
may automatically delete past recordings after certain period. Automatic deletion is
disabled by default. You may check the “Automatic Delete” box and set number of days to be
passed before deleting in the below field.
CHANGING PASSWORD
You need to set a password to prevent unauthorized people to open
my
LOG
program. Press
the “Change Password” button. In the opened window, type and confirm new password.
Leave “Old Password” field if not defined before (default).
