my
LOG
User Manual (1.1) Page: 15 / 24
SETTING UP MYLOG
All settings of
my
LOG
is done from the settings tab. Settings are handled in four group. You
may select the group of setting to make from the top of the tab. After completing settings,
before switching to another group of setting or another tab, click the “Update” button on lower
left of the tab. Otherwise new settings will not be saved.
GENERAL SETTINGS
General settings tab is shown in figure-12.
Figure-12
CHANGING SERVER NAME
Server name is “myLOG” by default. When you type another name, it is seen on the window
bar of
my
LOG
client program. Giving name is especially useful when connecting different
my
LOG
s in different locations via local network or internet.
ASSIGNING ANSWERING MACHINE MESSAGE
In “Ans. Machine Msg.” field, you may assign a system message to be used as “welcome
message” of answering machine feature. You may select, listen or delete a message with
buttons in the right. Only system messages is shown in the pull-down list.
ASSIGNING WARNING MESSAGE
In “Warning Message” field, you may assign a system message to be used as warning
message. This feature is to inform callers about the telephone conversation is being recorded.
NOTE:
System messages must be defined prior to assigning to a function (see Defining
System Message on page 11).
