C
L E A R
P
A T H
- S C
U
S E R
M
A N U A L
R
E V
.
1 . 3 6
2 2
T
EKNIC
,
I
NC
. T
EL
.
(585)
784-7454
Example ClearPath-SC network. (DC bus wiring not shown.)
Tightly coordinate up to 16 or more motion axes per port (or
more). ClearPath-SC’s free C++ and .NET class libraries make it possible
to write software for complex multi-axis applications. Simple applications
can be written in a single execution thread, and, for more sophisticated
systems, ClearPath-SC supports multi-threaded applications as well.
Optional advanced firmware allows you to generate user-defined
interrupts (attentions) for a variety of system events, allowing you to
create highly responsive and deterministic multi-axis systems.
ClearPath-SC features a quick, automatic setup. Install the included
ClearView software, connect ClearPath to your PC via USB or high-speed
RS-232, and let it auto-tune itself to your mechanical system for optimum
servo performance.
ClearView software allows you to get moving quickly. You can set
many motor parameters, and exercise your mechanical system and
electronics with just a few mouse clicks.
Safety and self-protection features are standard. ClearPath-SC will
rapidly shut down if it becomes overloaded, overheated, detects a hard
stop, or exceeds any of the safety or motion limits you specify.
Made in USA. Each ClearPath-SC motor is built and tested in our New
York manufacturing facility, so you can be certain you’re getting a high
quality, fully tested motion control product right out of the box. And,
Teknic backs up each ClearPath-SC motor with a three year warranty.
