Teknatool NOVA TL1200, Instruction Manual

Page: 7 / 14

Preliminary Manual
Page
7
SPEED ADJUSTMENT
90-94 12-004
Please refer to photo
3,
page
5.
The woodlathe has an 8 speed range:
NEW
178,
300,
570, 850, 1200, 1800,2400,
3000
FOR MOTOR RATED AT 1425 RPM.
214, 360, 684, 1020, 1440, 2160, 2880, 3600 FOR MOTOR RATED
AT
1710 RPM.
Speeds can be changed by moving the belt to the required position on the 8 step
pulleys.
CHANGING SPEEDS
The Motor change lever is located to the right and at the back of the
headstock. The assembly of unit is described on page
6 of
this manual.
Please refer to photo
3,
page
5 .
The motor is locked in position and the belt tensioned when the handle is
towards the operator.
1. Push handle away from headstock to release tension.
2. Open front cover,
3. Support motor weight with your left hand while positioning belt to required pulley
step your right hand.
For eed onto largest step of headstock pulley lowest speed):
Feed elt pulley by rotating spindle.
4. Remove left hand to allow the belt to take the weight of motor.
5 . Re-tighten motor mount plate by pulling handle towards
6. Close front cover.
.i'