
38
128-1019-004
CALIFORNIA RESIDENTS PROPOSITION 65
Attention California Residents
Cali
fornia’s Proposition 65 entitles California consumers to special warnings for products that contain chemicals known
to the state of California to cause cancer and birth defects or other reproductive harm if those products expose
consumers to such chemicals
above certain threshold levels. We care about our customers’ safety and hope that the
information below helps with your buying decisions. The general Proposition 65 notice is as follows:
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a
substance known to the State of California to cause cancer. Your risk from exposure to these chemicals
varies, depending on how often you do this type of work. To reduce your exposure, work in a well-
ventilated area and with approved safety equipment, such as dust masks that are specially designed to
filter out microscopic particles.
WARNING: This product can expose you to chemicals (Rust Prevention Oil) which are known to the
State of California to cause cancer. Do not touch your eyes or face after unpacking until you have
washed your hands. Its advised to wear disposable gloves while unpacking and while cleaning the
product down for first use. Always unpack and clean in a well-ventilated area. Always wash your hands
after unpacking the product for first use. Dispose of packaging bags thoughtfully. Read the Safety Data
Sheet for this Rust Protectant Oil here:
NOVA Orion
18” DVR
Lathe Manual
128-1019-004
© Teknatool
®
International 2019
All rights reserved. Teknatool
®
USA Inc.
Due to NOVA’s continuou
s product improvement and development policy, specifications, features
and images contained in this manual may change without notice. Teknatool is not responsible for
omissions or errors herein, or for incidental damages in connection with the furnishing of this
information.
10 October 2019