22
128-1019-004
The lathe will prompt to select the approximate
diameter of the workpiece. The lathe will
automatically suggest the recommended speed for
the operation.
➢
Note:
The speed shown on the lathe is only a recommendation/ guideline. Actual required lathe speed must be
determined from the actual condition along with the experience of the turner.
Changing the Home Screen Display Mode
Press the
<Menu>
key while on the lathe home screen to
access the main menu of the lathe.
To Customize F Keys, go to:
Lathe Settings
Wireless Remote
Motor Paramters
Customize F keys
Lathe Settings
Wireless Remote
Motor Paramters
Use the speed control knob
to navigate down to “
Lathe
Settings
”.
Press the speed control knob to enter the function.
The first option
“Display Size”
will indicate the current
display mode the lathe home screen is set; Large or
Normal.
Press in the speed control knob while the cursor is next to
the line “Display Size”. The display mode will switch
between “Large” and “Normal”
Press
<OFF>
to return to the home screen once the desired
home screen display mode has been selected.
➢
Note:
The change will take effect immediately.