28
128-1019-004
Wireless Remote
The standard NOVA DVR Wireless Remote II (SKU 55522) can be used with the NOVA Orion lathe (Refer to Appendix XX
for installation procedures).
Once the remote receiver is installed on the lathe:
•
Navigate down to “Wireless Remote” function in the
lathe main menu.
•
Press the speed knob to enter the function.
There will be 2 options inside the function:
•
Pair new remote
•
Unpair remote
➢
Note:
The bottom line shows the ID of the current
paired remote.
Pairing New Remote
•
Select “Pair new remote” option to start the process to
pair the new remote.
•
A prompt screen will show to prompt the user to press
the
<OFF> key on the remote.
Unpairing Remote
•
Select “Unpair remote” option while a remote is paired
and the user will be prompted with an option to unpair
the remote.
•
Press
<F/R>
key to unpair remote.