18
123-0719-018
Intermediate Functions
Using the electronic depth stop function
Setting the stop depth value
Press the
<Set Depth>
button to enter the set depth
mode of the drill press. In this mode, the Depth Stop
icon will be blinking.
Set the desired depth (measured in the selected
units) by turning the speed knob in the clockwise
direction to increase the set depth that is displayed
on the screen.
Turn the speed knob in the anti-clockwise direction
to increase the set depth that is displayed on the
screen.
Note:
Turn the speed knob for a fine adjustment.
Press and turn the speed knob for a coarse
adjustment
Once the set depth entered on the screen
Save the set depth value
Cancel and Return
Press the
<Zero/ Confirm>
button once the desired
depth is entered on the screen to save the set depth.
The depth stop icon will stay lit if the set depth value
is saved successfully.
Press
<Display/ Cancel>
button to return to the
default screen without saving.
Blinking Depth
Stop Icon
Turn the speed control
knob to set the depth
on the screen
