6
123-0719-018
Attaching the Drill Press Table
Take the drill press table out from the packaging and inspect all surfaces for and defects (i.e. Stains, rusts,
fractures, scratches) on the machined cylindrical part of the table.
Insert the drill press table into the table arm.
Loosen the table arm lock if necessary.
Tilting the table
Loosen the main table bolt with a 24mm wrench and loosen the smaller grub screw with <Allen Key>.
Surfaces to check for cracks,
porosities and any defects
This handle is used to lock the
inserted table into place.
Loosen this handle if the table
cannot be inserted easily
1.
Main hex bolt to
be loosened with
the included
24mm wrench
2.
Grub screw to be
loosened with a
mm Allen key
