14
123-0719-018
Changing the display mode
Display modes on the NOVA Viking Drill Press
There are 3 display modes available on the NOVA Viking drill press:
1. Depth
2. Speed
3. Power
Press the
<Display/ Cancel>
button to sequentially
cycle through each of the available display modes.
The display modes are indicated by the highlighted
icons on the HMI screen.
Depth Display Mode (In desired units)
Rotational Speed Display Mode (rpm)
Power useage display mode (%)
Changing the measurement units
Measurement units available on the NOVA Viking Drill Press
There are 3 types of measurement units available on the HMI screen:
1. Imperial decimal
– Rounded to 0.005” (default)
2. Imperial fraction
– 1/16
th
inch increments
3. Metric units
– Millimetres
Hold down the
<Display/ Cancel>
button for 3 seconds unit a beeping noise is heard from the HMI.
Once the beeping noise is heard, the HMI will change the displayed measurement units
The set measurement units will be indicated on the HMI by the highlighted icons
