Teka RMW 963, Technical Passport

Page: 27 / 68

27
ENGLISH TECHNICAL PASSPORT
Microwave Oven RMW 963
Â
The microwave oven is out of
service! Check that:
B
The oven connecting cable is
properly plugged into the outlet.
B
The oven is on.
B
The door is securely closed.
You should hear a click when you close
the door.
B
There is no object stuck
between the door and the end part of
the oven.
Â
A strange noise are heard in the
process of operation! Check that:
B
There is no sparking in the
oven caused by metal objects (refer to
Suitable Cookware and Dinnerware).
B
The cookware or dinnerware
are not in contact with the chamber
walls.
B
There are no flatware or
utensils left in the oven.
Â
Products are not heated or
extremely slowly heated! Check that:
B
You have not by accident
used metal cookware or dinnerware.
B
You have set the required
duration and power for cooking.
B
You have not placed a larger
quantity of products, or products colder
than usually.
Â
The products are extremely
hot, overdried or burnt! Check that you
have set correct duration and power for
cooking
Â
Some noise is heard upon
completion of the cooking process!
It is not a problem. The cooling fan
continues working for some time. When
the temperature is low enough, the fan
will shut down automatically.
Â
The microwave oven turns on,
but the illumination lamp is not on! If
all functions of the oven work normally,
it means that the lamp may be blown.
You can continue using the oven.
Lamp Replacement
To replace the lamp, perform the
following steps:
B
Disconnect the oven from
power supply. Unplug the connecting
cable from the outlet and switch off the
circuit breaker.
B
Unscrew and remove the
lamp cover (1).
B
Remove the halogen lamp
(2).
Warning! The lamp may be extremely
hot.
B
Install new halogen lamp
12 V / 10 W. Warning! Do not touch
the halogen lamp surface, as you
can damage it. Follow the lamp
manufacturer’s instructions.
B
Screw the cover in place (1).
B
Reconnect the oven to power
supply.