Teka MB 620 BI, User Manual

Page: 34 / 68

The desired operating time is selected by
turning the timer button.
For times under 2 minutes, turn the timer
button to a higher time and then go down to
the desired time.
As long as the timer button reads other than
zero, the oven light should be on.
When the operating time is over, the timer
emits a beep and automatically disconnects
the oven.
It is possible to change the operating time,
the power level or the function while the oven
is functioning, by turning the respective
control.
It is possible to open the door of the oven at
any moment while the foods are being
cooked. In this case:

THE PRODUCTION OF MICROWAVES
IS AUTOMATICALLY INTERRUPTED;

The grill switches off, but remains very
hot;

The timer stops automatically, indicating
the operating time that is left.
If you wish, you may:
1. Move or turn the foods around to improve
uniformity of the heating process;
2. Select another function, placing the
function selector in another position;
3. Change the operating time that is left, by
turning the Timer Button.
Close the door again. The oven starts to
function.
Interrupting function
To interrupt the functioning of the microwave,
turn the Timer Button to ZERO or open the
door. If you wish to cancel the cooking
process, turn the Timer Button to ZERO and
close the door.
WARNING: When you finish using the
oven, always turn the Timer Button to
zero, because otherwise the oven will
start to function when you close the door
and may be damaged if it functions when
empty.
End of Function
When the set time has elapsed, the oven
beeps and the Timer Button read ZERO.