GB
99
cator if the glass surface of the cooking
area reaches an elevated temperature.
Burn risk exists. When the temperature
decreases, the indicator turns off (if the
cooktop is disconnected), or it will show a
0
if it is still on.
TURNING ALL PLATES OFF
All plates can be simultaneously discon-
nected by using the general on/off sensor
(1). All plate indicators will turn off.
Pan detector
Induction cooking zones have a built-in
pan detector. This way, the plate will stop
working if there is no pan present or if the
pan is not suitable.
The power indicator will show a symbol to
designate "there is no pan"
if, while the
zone is on, no pan is detected or the pan
is not suitable.
If a pan is taken off the zone while it is run-
ning, the plate will automatically stop
supplying energy and it will show the
symbol for "there is no pan". When a pan
is once again placed on the cooking zone,
energy supply will resume at the same
power level previously selected.
The time for pan detection is 3 minutes. If
a pan is not placed within this time period,
or the pan is unsuitable, the cooking zone
shuts off. The power indicator will go from
showing the symbol "there is no pan" to
showing 0.
When finished, turn off the coo-
king zone by using the touch controls.
Otherwise an undesired operation
could occur if a pan is accidentally pla-
ced on the cooking zone during the
next three minutes. Avoid possible
accidents!
Blocking cooktop sensors
BLOCK FUNCTION
With the Block Function, you can block the
other sensors, except for the on/off sensor
(1), in order to avoid undesired opera-
tions. This function is useful as a childpro-
of safety.
To activate this function, touch sensor
(6) for at least one second. Once you have
done so, the pilot (10) turns on indicating
that the control panel is blocked. To deac-
tivate the function, simply touch sensor
(6) again.
If the on/off sensor
(1) is used to turn
off the appliance while the block function is
activated, it won't be possible to turn the
cooktop on again until it unblocks.
Stop Function
This function puts the cooking process on
pause. The timer will also be paused if it is
activated.
Activating the Stop function
Touch the Stop sensor
(7) for one
second. The pilot (11) lights up and the
power indicators will show the symbol
to indicate cooking has been paused.
Deactivating the Stop function
Touch Stop sensor
(7) again. The pilot
(11) turns off and cooking resumes under
the same power and timer settings that
were established before the pause.
Heat Sustainment Function
This function makes it possible to keep
warm food that is in the pan placed on the
IRX_61401274_GB_Maquetación 1 2012-06-08 09:01 Sida 99
Summary of Contents for GKST 60 i4 TREND SLIDER
