Tube cleaning system
pro
tub
13-24
operating instructions
The connection to your PROTUB is done using the electrical
connection cable that comes with the machine. This cable has a
standard mains plug at one end and a special power connector
(blue) for the machine at the other end. Connect the cable to the
mains and then connect it to your PROTUB. The connection to
your PROTUB is done by turning the blue connector clockwise
as shown in the figure.
Connection to mains power:
4
Connect the hose to a water supply with a minimum pressure of
2 bar. There are adapters for various taps that are offered as
optional accessories. Connect the hose to your PROTUB water
inlet connector.
Connection to the water supply:
5
If the equipment is to be used without mains water
supply, the time of use should be moderated to avoid
excessive heating due to friction.
Check the type of plug before
connecting it to the mains supply.
