Tube cleaning system
pro
tub
6-24
The PROTUB equipment should NOT be used for anything other than the uses given in this instruction
manual.
Make sure all the connections are correct before starting the equipment.
Before starting the equipment, make sure that the brush is inside the duct you want to clean.
Make sure your PROTUB is placed on a flat and stable surface.
Everybody who uses the PROTUB equipment must be properly trained.
Hold the flexible rotor shaft firmly before starting the brush motor. Always hold the flexible rotor shaft
firmly while using the brush.
Safety glasses must always be worn to prevent any possible spray or splashes from reaching the
operator’s eyes.
Fasten your PROTUB properly during transport.
Keep objects, loose clothing, hair, etc. well away from the machine’s moving parts.
Do not handle the equipment with wet or damp hands.
Do not use the equipment in areas where there are flammable liquids.
To avoid electric shock, never allow the equipment to be exposed to rain. Store the equipment indoors
in a cool, dry place.
Do not open the PROTUB duct cleaning robot’s control box. In the event of a fault, contact the
TEINNOVA Technical Assistance Service on +34 941 44 50 56.
safety warnings
