background image

Operation Manual TCH Pro 202 & 203

Chapter 6: Warranty  

WARRANTY 

TEILCH LLC warrants to the original user that this instrument shall be free from defects in 
material and workmanship for one year from the date of shipment. Teilch’s obligations under 
this  warranty,  and  the  sole  remedy  for  its  breach,  are  limited  to  repair  or,  at  Teilch’s  sole 
discretion, replacement of the instrument or any of its parts.  

Should  it  become  necessary  to  return  the  instrument  for  repair  during  or  beyond  the 
warranty  period,  user  shall  contact  Teilch  LLC  (USA).  E-mail:  [email protected].  User  is 
responsible  for  shipping  charges,  freight,  insurance  and  proper  packaging  to  prevent 
damage in transit. 

This warranty shall be void in the event of user actions including misuse, improper wiring, 
operation  outside  of  specifications,  improper  maintenance  or  repair,  unauthorized 
modification, or any other defect caused by the user's neglect or accident. 

This warranty is the sole and exclusive warranty for this instrument, and no other warranty, 
whether  written  or  oral,  is  expressed  or  implied.  Teilch  specifically  disclaims  any  implied 
warranties of merchantability or fitness for a specific purpose and will not be liable for any 
direct, indirect, incidental, consequential, or punitive damages. Teilch’s total liability is limited 
to repair or replacement of the product. 

Page   of 

32

33

TCH Pro v1.2.1

Summary of Contents for TCH Pro 202


































Reviews: