Operation Manual TCH Pro 202 & 203
V. DATA MANAGEMENT
•
All data is saved by default on the provided SD card.
•
To download the data:
1. Enable mass storage in settings and connect the device to a computer with the
USB cord or;
2. Remove the SD card from the device and directly insert it into your computer.
VI. REMOTE OPERATION
*** Software and firmware updates required for remote operation to be released in
spring, 2017 ***
Device may be controlled directly via computer for operation and data analysis.
Please download
Teilch Lab Software
from www.teilch.com/support.
Requirements
•
Bootloader 2.0
•
Firmware 2.0 or superior
Refer to
Chapter 5, Section II
for software updates.
Page of
28
33
TCH Pro v1.2.1
