Tegras pneumatic brushing robot
30-47
operating instructions
The TEGRAS MULTIPRO equipment is designed to be able to rinse and produce foam inside ducts. In
order to be able to do this, it is necessary to connect your TEGRAS MULTIPRO to the machine supplying it
with foam and water. It is recommended to use rinsing equipment and a foam generator sold by
TEINNOVA.
It is connected by using the liquids hose. The connection should be made when your TEGRAS MULTIPRO is
switched off.
Connect the liquids hose to the liquids outlet on the rinsing and
foaming equipment to be used. In this image, the connection is
made to the IFOAM MULTIPRO. After making the connection,
open the shut off valve on the liquids inlet on your TEGRAS
MULTIPRO.
Connect the liquids hose to your TEGRAS MULTIPRO. In this
image, the shut off valve is in the open position.
Connecting your TEGRAS MULTIPRO to the IFOAM:
4
